哈尔滨Emulsified oil concentrated compound liqui-Yingkou kangru Technology Co., Ltd

ABG欧博·(中国大陆)官方网站、

产物banner
Your current location : Home >> 哈尔滨emulsified oil

Contact UsContact Us

C

Yingkou kangru Technology Co., Ltd

Contact: Mr. Zhao

Telephone: +86-18841775200 

Address: Steel Industrial Park, Laobian District, Yingkou City, Liaoning Province

Post Code: 115005

Website: /en



哈尔滨Emulsified oil concentrated compound liqui

哈尔滨Emulsified oil concentrated compound liqui

  • Cname:哈尔滨emulsified oil
  • Views:Times
  • Release date:2021-01-11 11:43:59
  • Content

1、 Overview

This product is made of high efficiency antirust agent, lubricant, emulsifier, surfactant and other raw materials by special process. This product can be mixed with mineral oil in the ratio of 1:3. It is easy to be emulsified and used in a small amount. The prepared working fluid has no peculiar smell and has good lubrication, cooling, cleaning and anti rust properties. Widely used in turning, grinding, milling and other machining processes.

2、 Technical index (emulsified oil)


project

quality index

test method

(refer to SH / t0365)


Oil based appearance (15-35 ℃)

Brownish red oil

Visual inspection

Emulsion pH 5%

8.0~9.5

SH/T 0365-92

Emulsion stability (15-35 ℃),

24h ml

soap

≤0.5

oil

Salt allowance

(15~35℃), 4h

No phase separation

Antirust property of emulsion ((35 ℃± 2 ℃)

Cast iron sheet


Single chip 24h

qualified

Lamination 4H

qualified

Emulsion corrosion test (55 ± 2 ℃), full immersion

45 × 24h steel

qualified

62 × brass 4H

qualified

Ly16 aluminum 4H

qualified

Defoaming performance ml / 10min ≤

2

SH / t0365-1992 Appendix E



3、 How to use it

The viscosity of mineral oil should be 10-20 mm2gs. The prepared emulsified oil can be mixed with water in any proportion to form an emulsion. The recommended concentration is 3-5%. Different concentrations can be prepared according to the processing difficulty and climate.

4、 Note:

1. When preparing the new solution, the water should be drained first and then the original solution should be added, and it can be used only after being stirred evenly.

2. The total hardness of the water used to prepare the working fluid shall not exceed 300ppm, otherwise the stability of the working fluid may be decreased, and the serious case will not be emulsified.

3. The equipment is equipped with magnetic filter and other filtering devices to remove impurities in time.

4. This product can't be mixed with other cutting fluids, so as not to affect the use effect. If it needs to be mixed, it can be used only after it is tested and feasible.

5. 5 ~ 35 ℃ indoor sealed storage. In the process of storage and transportation, it is necessary to prevent the mixing of water and impurities, so as to avoid the deterioration of products.

5、 Packaging, storage and transportation

1. Package: 20 l or 200 L barrel.

2. This product is nontoxic and nonflammable. It can be used for general commodity storage and transportation


Tags

0

Recently Viewed:

Copyright ? Yingkou kangru Technology Co., Ltd support: Yingkou Zhongchuang Network Technology Co., Ltd
【网站舆图】【sitemap】
友情链接:欧博abg(注册)会员登录  彩名堂(中国区)官方网站入口  尊凯实业·(中国区)有限公司官网  尊凯实业·(中国区)最新官方网站  尊凯实业·(中国)首页  尊凯实业·(中国)首页  尊凯实业·(中国区)最新官方网站  安博电竞·(anbo)官方网站